Hueforge Green dragon

a Hueforge Picture of a Green Dragon  without a Backround 

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x200mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm

Filaments Used:
PLA Sunlu Meta red Transmission Distance: 7
PLA+ Sunlu Black Transmission Distance: 0.6
PLA+ Sunlu Green Transmission Distance: 10
PLA+ Sunlu Grey Transmission Distance: 2
PLA Sunlu Green Transmission Distance: 6
PLA+ Sunlu White Transmission Distance: 4
This print uses 6 unique filaments

Swap Instructions:
Start with red
At layer #6 (0.56mm) swap to Black
At layer #7 (0.64mm) swap to Green
At layer #12 (1.04mm) swap to Grey
At layer #13 (1.12mm) swap to Green
At layer #14 (1.2mm) swap to White for the rest.