MFD Crossbow Mini AAT Mount for HDZero, Walksnail, SIYI HM30, Maple Wireless and Triple Feed Patch Antennas

Here is another tripod mount for the MFD Crossbow Mini AAT. This one you're able to use either the SIYI HM30 video link, HDZero VRX, or the Walksnail VRX. I made the HDZero and Walksnail VRXs slide in type mounts. The HM30 uses a ¼ 20 anchor thats used on the bottom of tripod plates to affix cameras to them. The only hard mount pieces on the mount are the antennas. Both the Triple feed and the maple wireless antennas are screwed into the mount itself. Everything else is easily removable. You can find the model for the walksnail VRX here that will allow you to mount it to this AAT.

 You'll need some m3 heat set inserts 3X4.6X5.7 for the crossbow tilt bracket. As well as the VRX mounts. 

You'll need some m3 screws. I would just get an assortment if you don't already have one.  you'll need 

The last thing you'll need is 14mmX12mmX250mm carbon fiber tube. The ones in this link you'll have to trim down to 250mm or however long your GPS cable is. 

That should be it. Print in whatever filament you think is best. I used ASA.