Eurorack / 3.5mm / USB Cable Holder for Mic Stand

I am in the process of organizing my studio and found a design similar to this, but it didn't take advantage of the full 256mm² bed of my Bambu X1C. So I made a slightly larger version. Also fits most generic USB cables and other cables of similar thickness.

My cheap mic stands have a 5/8" hole diameter that I'm able to screw right on to.

I printed in ASA with almost stock Bambu slicer settings, because that's what I had loaded at the time. I only added alternate walls and I upped the bed temp to 100C. Should print great in almost any filament.

Thanks for looking!