Butt hinge - for enclosure box etc.

This hinges are for my enclosure printer, but can also be used for other purposes.

As shaft is used shortened bolt M5x80 “NECK BOLTS MUSHROOM HEAD SQUARE” - approx. 43mm - I bough them in “Hornbach”

Hinge fixing with M4 screws with countersunk head.

There is a thread in the bottom part of the hinge - it needs to be repaired with a tap.

No supports

Nozzle diameter: 0,4

Material: PLA

Layer height: 0,2 mm

Infill: 20%

Perimeter: 4

Brim: On