Weather Vane 2

Weather vane 2.

Printed form PETG. Need 2x screw M8x100, 3x lock nut M8 and 4x bearings 608ZZ (ABEC for in line - bought in sport shop).

All parts printed full infil (better for point of gravity) with 3 perimeters and 0,2 mm layers.
Part 1 oriented screw side up, support on build plate only.
Part 2 oriented verticaly, no support.
Part 3 oriented screw side up, support on build plate only.
Part 4 no support, 9x.
Part 5 and 6 oriented screw side dovn, verticaly, support on build plate only.
Part 7 and 8 no support.
Part 9 oriented screw side dovn, verticaly, full support.
Part 10 no support.
Part 11 and 12 oriented verticaly, no support.
Part 13 oriented screw side up, support on build plate only.
Part 14 oriented verticaly, no support.

Part 11 is for mounting on pipe 39 mm, part 11B is for mounting on pipe 48 mm, part 11C is for mounting on wall.

Part 14B is shorter spike, but longer one is better for point of gravity.

Is better to use lubricant on screw and bearings.

All parts are screwed together and are fully replaceable. No glue.

Have fun.