August 17, 2024
Description
Bookshelf for a single book.
For books up to 20 cm wide and 30 mm thick.
The shelf is screwed on from behind with two 4x30 screws (holes 15cm apart).
Installation suggestion: (2 screws, 1 screwdriver)
1. 2 points, 15cm apart, mark with a spirit level
2. screw through the board from the front and then out again
3. screw into the shelf from the other side
Printing profile:
PLA
2 walls
15% infill
no supports
Fuzzy skin - all walls - point distance: 0,1mm - skin thickness: 0,1mm
Weight: approx. 51g per part
Filament used: GEEETECH Black Walnut PLA
License:
Creative Commons — Attribution — Noncommercial
Till
