AtomRC Swordfish DJI O3 mount V2

the upper part also works with my tail cam mount for the volantex phoenix v2 2000:

https://www.printables.com/de/model/908679-volantex-phoenix-dji-o3-tail-mount

the upper parts are actually identical

improvements:

• better look :D
• magnets instead of screws
• lower profile
• easier access
• more robust
• lighter
• angled - as is the swordfish's vtx bay
• modular
• swappable - top part fits on my volantex phoenix base too for example

printing:

• supports required for both parts sadly
• hybrid tree supports for top, snug normal supports for bottom
• 0.2mm layer height
• petg or better
• ≤20% infill sufficient

assembly:

• requires 4 or 8 5x5x3/5x5x5 neodymium magnets (press-fit)
• antenna clips in place, air unit should fit in cavity of top/bottom part
• stick base down with double sided tape
• cable should easily fit through slot
• let it (magnetically) snap together
• insert the magnets CORRECTLY, once in, you can't really remove them without destroying the part
• if you use 5x5x3 magnets, make sure they're seated flush against the mating surface
  
  V3 might include a pan-servo integration, no release date yet, not even in the works