Cable holder LED lights bathroom mirror

Bathroom mirror (Desco part number 136475 120x60 cm) comes with 2 LED lights (Desco part number 140218) on top which are connected to 230V behind the mirror. The mirror is glued against a wooden panel with several cutouts to guide cables from LED lights of the mirror. 3 long ones at the top (left, middle, right) and 1 short at the bottom (middle). I designed some cable holders to place in these cutouts to guide the cables of the LED lights properly.

3 variants

1. Hollow Long: top side of the mirror has longer cutouts. Hollow to guide the cables.
2. Full Long: cover for the middle unused cut out at the top side.
3. Full Short: cover for the middle unused cut out at the bottom side

Installation

Print the beams you need for your mirror, put the cables in the cut outs if applicable, and add some wood glue to the beams and place them in the cut outs.