August 19, 2024
Description
HI Everyone! Hope You All Enjoy This Newest Addition- Jesus Portrait
Come To Our Patreon To Check Out Our Whole Collection, You Only See 10% Here On Printables! Subscribe And Gain Commercial License! Link In Bio!
We are including Two Versions, the finished and colored 3mf file ( A1 Selected, just change to desired printer).
The Second version is just the STL, the information will be below
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 137.14x240mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Beige Transmission Distance: 8
PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 3 unique filaments
Swap Instructions:
Start with Black
At layer #7 (0.64mm) swap to Beige
At layer #14 (1.2mm) swap to Jade White for the rest.
License:
Creative Commons — Attribution — Noncommercial — NoDerivatives
DenusaPrints
