MR2 ZZW30 vent removal tool

Needed a tool to remove the vent grill without disassemble the whole dashboard.

Puller it's not needed as long you pull from the grill with the method from your convenience.

Printing Instructions

• 0.1mm layer height recomended
• Use PETG, PLA, it's too brittle.
• 8 perimeters/Solid

Instructions

• Fit the fork in the middle of the grille, flat part toward the grille.
• Insert until the grill its liberated from their holes and pull.
• Use slim type on one side if you can insert the two standard ones.