BenQ ScreenBar Halo thick monitor mod

Compatibility mod for BenQ ScreenBar Halo for thick monitors.

Opening case

1. Remove 4 screws. 2 under regulatory label, 2 under corner of foam pad. (Pic1)
2. Use a spudger to separate sides at the curved double stick tape and then remove whole cover in one piece (translucent and grey part). (Pic2)
3. Remove flat flex by flipping up black lever ▲ Remove 4 screws under foam pad. (Pic3)

Modification to case
Drill hole and elongate into a slot in counterweight case offset to connector side. (Pic4)

Camera attached using a ¼'-20x½' pan head screw