Beacon light mount

This is a spacer for mounting beacon lights. The ones used are easily be found on amazon or e-bay.

Printing:
Print in the given orientation with 0.2mm layerhight.

Assembly:
Cut the lights conector and feed the cable trough the mount. Mark and drill a 6mm hole on the spot you want the light to be mounted. Fix in place with a drop of superglue.
 

Note: I recommend only gluing the mount to your car and NOT glueing the light to the mount. With this, it stays in place during normal use but can be pushed out of the way if your car hits something or rolls over. So nothing will break.
 

Looking for some heavy loads or cargo mooring points to give your new warning lights a purpose? Maybe have a try with this collection