SVG Crocs charms / earper jibbitz

Use SVG to create custom Crocs Charms! 
Some earper inspired charms included.

Use OpenSCAD or the online customizer feature here.

Just print the names with a filament color change, clip them onto your crocs (they stay without glue) and have fun!

Thanks

Big thanks to @Earper4Life for his idea for earper inspired custom crocs charms - it was the base for this configurable model.

Thanks go out to nyknyc and his spike-crocs-charm where i got the idea of a two-part design from. Check out his model as well!

Features

• Uses minimal filament, print many in one go, prints in place
• No glue needed, just push the pin in from the bottom
• Color change possible also without MMU

Customizing

You can customize the model. To do that, please install OpenSCAD on your own computer and follow these in depth instructions. 

Printing & assembly

• Use .2mm quality setting
• no support material needed
• change filament color at 5.8mm

Assembly

Print pin and charm

On the back side of the charm, you have a hole where you need to press in the pin

In case its hard to press in on the Croc, press it in before mounting to the Croc once:

Then put the pin in from the bottom

And put the charm on top

More charms

Check out the emoji crocs charms