Shampoo travel bottle (100ml, 75ml, 50ml, 25ml)

This is a collection of travel bottles, with following variations:

• shampoo (100ml)
• conditioner (100ml)
• shower gel (100ml)
• blank (100ml)
• blank (75ml)
• blank (50ml)
• blank (25ml)

You can choose a variation from the different plates in the .3mf file.

Rather than buying small travel-size shampoo bottles, i thought it is more sustainable to print a reusable bottle myself. the bottle is also suitable to bring on board of an airplane (100ml limit).

If you want more grip in the shower, you can print the bottle-bottom with fuzzy skin (contour) as i have done for the shampoo and conditioner bottle. It also helps to distingiush them from another.

To assemble you need to glue the bottle top into the bottle bottom. Make sure that you have added glue on every contact point, if you are not sure i recommend also adding glue when top and bottom are linked.

If you want to make it watertight (recommended for shampoo, etc.) you can print an o-ring with tpu (1x, 2x, 3x, 6x, 9x in .3mf) or buy an o-ring for standard parallel BSP thread.