Customisable Modular Drawer Organiser | Vase Mode

This is a modular system to divide your drawer according to your wishes. I have created different sized containers based on the hexagonal shape which are printed in Vase Mode and can be connected to each other.
Besides the different sizes, there are also smaller elements to completely fill a rectangular shape.

You can easily set the height of the elements yourself in the slicer.

Due to the fit, the cups can only be enlarged to a small extent in the X and Y dimensions.
I will upload more fitting parts soon so that you can also fill drawers where no complete element fits. I also have ideas for further accessories. You will find these under the "Remixes" tab.

I recommend to print all parts in vase mode with two bottom layers to save time and material.

There are many possible combinations, e.g. you can use two half hexagons to make a divided hexagon, or turn the small triangles on the edge upside down so that they are closed. When slicing, make sure you use the correct pieces as there are right and left versions of some.

Unfortunately, the "1x3 Cup" and "2x3 Cup" elements do not fit on the Prusa Mini.

I would be very happy about a like or a rating if you like my project! Also take a look at my other designs and follow me if you don't want to miss extensions of this project!