tin can scoop

I used a tin can to get wood pellets out of my storage bin. To simplify my job i wanted to add a grip. This is what i came up with.

I used an an old broomstick as handle, but you can also print a handle.
It is fully customizalbe thus it should fit any tin can you can find.

The tin i used is from a "unox" soup can. diameter top = 101.5, diameter bottom = 100, height 118 mm

Print Settings

Printer Brand:

Prusa

Printer:

Rafts:

Doesn't Matter

Supports:

Resolution:

0.3mm

Infill:

Notes:

it is a tool, so the print quality is not very important

Category: Household Supplies