Small Propulsion Pod for 2206 Brushless Motor

        Small Propulsion Pod for 2206 Brushless Motor for Hand Chuck or Single motor to Twin Conversion. For Flat bottom airfoils. Includes cowl. Has ventilation. I designed this specifically to fit and convert my CG-4A Waco glider from 3Dlabprint to the powered historical version PG-2A. I printed an extra wing for these pods so I could easily fly it with or without power just by switching wings. Pods glue onto wing. Cowling held on with screws. More updates on installation and flights. 

What I used

• Colorfabb LW-PLA (active foaming)
  • Use best settings for your printer
• 1 Wall
• 5% infill
• 8 grams
• Holds speed controller for motor
• CZ-2206 1450kv Brushless Motor
  • https://www.amazon.com/dp/B0BFWNRT1M?ref=ppx_yo2ov_dt_b_fed_asin_title
• 8x3.8 or 7x4 Propeller
  • CCW or CW & CCW 
  • https://www.amazon.com/dp/B07MBDWN4Z?ref=ppx_yo2ov_dt_b_fed_asin_title
• 10 Amp ESC x 2 
  • https://www.amazon.com/dp/B082PH4R1Z?ref=ppx_yo2ov_dt_b_fed_asin_title
• #2 machine screws for motor mount and cowl