Ornamental Nutcracker Over 24 inches Tall

Nutcracker over 24 inches tall printed on Prusa Mini+.

Printed with PLA at .2 mm layer height 15% infill (I like gyroid), 2 perimeters and .4 nozzle size. No supports required (the head printed fine upside down without supports). Parts are marked for the respective places on the model. The only parts that you need 2 of are the hand, arm, leg and boot. Head and hat are hollow. I used contact cement to glue everything together. Eyes are a 3 parts object ( eye, Iris and pupil ) and the mouth 2 parts ( teeth and lips ). There is a Left eye and a Right eye parts, top mouth, top teeth and lower mouth and lower teeth. All the parts are printed with the flat side facing the printing bed. Head, hat, arm and hand are printed upside down. You can do layer color change to print some of the pieces in two colors. You might need to sand a bit the hole for the Jaw pin. If you have any questions regarding the model send me a message. I don't now if the tolerances will work if you scale the model up or down, if they do please let me know in the comments section.

Happy Holidays!!!