Hamster Wheel (flat print)

All neighboring hamsters/mice will be jealous of the companion who receives this hamster wheel.

The ribs are bent. First, install all the ribs by inserting them into the slots of the outer ring, gently bending them around and inserting them into the matching slot on the other side of the outer ring. Make sure that the tapered blocks point inwards!

Finally, place the center part and press the blocks into the appropriate recesses in the center part.

Once all have been placed, the center part is held in place purely by clamping.

I didn't use a drop of glue, but if you want to be sure that everything stays in place, even with extremely wild hamsters/mice, use some glue.

The hamster wheel is made for small hamsters/mice. These can easily enter the wheel through the space between the ribs. For larger/bigger hamsters you can choose to attach only half of the ribs (8 pieces).

Then it is advisable to at least glue the blocks to the center part.

Colors used (all Bambu Filament):

• PLA Sparkle - Slate Gray Sparkle (for the wheel and center part)
• PLA Basic - Artic Whisper (for the ribs)
• PLA Silk - Silver (for the stand/base)