Washer and/or Dryer knob

I broke my dryer knob and needed a new one.  Many of the ones I already found online were either too small, required supports, didn't fit the dryer shaft or just too complicated to print (like come on now, it's just a dryer knob).  Wanted something simple to print with no supports needed.  Also didn't want to re-use that metal retainer that was found on the original knob that broke.  If you need a knob around 74mm (just under 3 inches) diameter and has a shaft of 4mm, then this knob will easily fit your washer and/or dryer.

• Printed this out of PLA
• Used 5% infill, gyroid
• 3 wall thickness
• Took about 30 min to print on a klipper printer

Cover photo shows the dimple to be black.  This is just sharpie.  I don't have a multicolor printer.