Stackable Boxes 4/6/8 v2 Dividers (Guide + ETD - 32/50/70)

This is the version 2 of my stackable box (SB) system. In order to use the lids, hinged lids and dividers with the stackable boxes, you will need this version 2 system, as they will not fit on the version 1 system.

These dividers come in various widths and depths.

The codes for these files are explained in the chart below:

SBD = Stackable Box Divider
FTB = Front to Back
ETD = End To Divider
E      = End (side of box)
D      = Divider (FTB)
G      = Guide
L       = Left
R       = Right
F       = Flat (printed flat)
FS     = Flat Standard
FF     = Flat Full (fuller box flat version)
U       = Upright (printed vertically instead of flat)
M      = Middle Divider
W      = Fits Box Width (2/4/6/8)
32     = 32mm (height)
50     = 50mm (height)                                                                                                                                                 70      =70mm (height)
1-6     = Width of divider (inches) or between dividers.

The boxes are still stackable with or without lids attached with the dividers inside.

The boxes / lids / hinged lids and dividers are colour coded - Green for 2" depth / Red for 4" depth / Yellow for 6" Depth and Blue for 8" Depth.

Do you want to be able to sell any or ALL of my prints shown here on Printables.com?
If so, then click on the 'buy me a coffee' link below, (or click here) and join one of my memberships. This gives you the option of a monthly, yearly or lifetime commercial license, along with a certificate and loyalty bonus models (both commercial and non-commercial). The non-commercial items are 3rd party models that may also interest you, all in one place.
The lifetime membership offers you unique commercial items not available to anyone else as well as all of the loyalty bonus models.

Please click the LIKE (Heart) Button if you like my models. If you REALLY like them, then please also buy me a coffee at the bottom of the page. Thank you.

Printing Instructions:

I printed these on my Creality CR-6 SE printer with Cura slicer 5.7.2 (Other printers/slicers can be used).

Material: PLA

Manufacturer: Prima Value

Colour: Light Grey

Resolution: 0.2

Nozzle: 0.4mm

Print Speed: 80mm/s (First layer @ 50mm/s)

Nozzle Temperature: 210 Degrees

Bed Temperature: 65 Degrees

Infill: 10%

Supports: No

Skirt: No / Optional

Brim: Yes / Optional

Raft: No / Optional

Enjoy.

                                     https://www.buymeacoffee.com/tigertone