December 19, 2021
Description
Print area of at least 290x290mm needed!
Print settings: Optional layer height but 0.2 works fine. 4-5 perimeters, 10-20% infill, at least 0.6mm top and bottom.
Print one pipe, two sides and two fronts. Assemble and print some more.
You can optionally use four M3x18 screws and four M3 nuts.
Hexnuts or squarenuts, both work.
Fusion 360 and STEP files included.
License:
Creative Commons — Attribution — Noncommercial
7
TypQxQ
