Voron Switchwire - Unenclosed - Arducam OV5648 Camera Mount

This mount is for the metal case enclosed Arducam OV5648. I used this one. It will only work on the Switchwire if it is the enclosure is not used. there is not room for the front panels.

BOM:

• 1 x M3 heat set insert (3x5x4)
• 1 x M3 6mm screw
• 1 x M3 washer
• 4 x M5 12mm screws
• 4 x M5 T-nut for 30mm extrusions

Insert the heat set insert into the top of the mount. Use the M3 screw with a washer to hold the camera. Attach the mount to the side of the printer with the M5 screws and t-nuts.