August 27, 2024
Description
3mf file has 3 parts: the screw cap, the base, and the unicorn.
Screw cap and base can print with standard/default settings, no support. The screw base may string a bit depending on your printer, and will likely need to be cleaned very slightly.
To print the unicorn as a hollow piggy bank:
Wall thickness 4
Top shell layers 0
Bottom shell layers 0 (this is very important to keep the hole at the bottom open)
10% infill using Lightning supports only! This will only support the top/coin slot
With supports of your choice
License:
Creative Commons — Attribution — Share Alike
winsettr
