2.5rs key fob

***i recommend printing the first layer very slowly with a monotonic line bottom surface pattern*** for the rest i did 100% infill regular speed but you will have to play with it to find what works best for you.

this is a case fob for the 2.5rs, everything from your original fob including board, buttons, battery, and case screw.

my stock fob keyring arch broke so i made this! this is not waterproof or resistant so be careful!

i am not very good at 3d modeling, do this at your own risk i'm not responsible if you damage your fob trying to use this print.

the fit of the top and bottom is tight make sure everthing is lined up correctly i recommend starting the top of the case halves together then snapping the bottom, they are snap in ridges.