Minions Stuart in a Thong

It's Stuart! From the Minions! In a Thong! On your keychain even…

One side is Stuart's front, and flip it over for his backside :0

You can print this with 4 colors but I wanted to get creative and use 6.

I was able to get 6 colors on my 4 material AMS on the A1, should be able to do the same on the MMU also. The .m3f has all the colors setup and pauses at layer 16 and 21.

I started with yellow, blue, black, and red.

At the pause on layer 16, I changed the blue for a white filament, then resumed.

At the pause on layer 21, I swapped White back to Blue, then also swapped Yellow to Grey.

EDIT: I included a STEP file if you get an error in PrusaSlicer with the 3MF, but you'll have to color it yourself. One STEP has a hole the other doesn't and will need a negative modifier.

Want one but can't print it for yourself? Check out my Etsy!