Spiral Titan3D Rocket

I have been having so much fun with the spiral twist fidgets recently, I thought I should design my own. Then I thought, I should make my logo (a rocket and profile icon) into the fidget. I was not disappointed. This thig is so fun.

To Print:

Well dialed and calibrated printer. The tolerances are tight with a near interference fit. 

Recommended layer height is 0.1-0.2

infill can be any amount

Walls/Perimeters should be 2+

Bonus imaginary points if you can use 2 different materials with vastly different shrink rates and have it still slide together easily. (Pictured is Burnt Titanium PETG and Red ASA).