The HomeCube - Prusa I3 Mk3 integration

Note: This file set is an extension to the HomeCube enclosure project. To make use of this file set, you have to download the basic file set and building instructions PDF as well.

These are the files needed for what was my personal main intention to design the HomeCube: to seamlessly and non-invasively integrate the Prusa I3 Mk3 into the cabinet. “Non-invasively” means, in this respect, that none of the the original parts of the printer have to be discarded to make the adaptions needed. And “seamlessly”, of course, means that all of the printer's controls stay accessible even when the cabinet is closed, so one can change settings while printing even when using temperature-sensitive filament.

The files will work for the original I3 Mk3 as well as for the Mk3S and Mk3S+. For the latter you will have to download one extra file (link is in the manual linked above).

As said before, I'm still not sure if these parts will work with the I3 Mk2 or Mk2.5 as well. If you should have a chance to (and are willing to) measure or test if they will fit, I'd be happy to get your feedback (and, if desired, provide adapted files according to your measurements).