SD Card Holder (Wallet)

Standard size card/license SD Card holder at least if you stack 3 of them; 2.8 mm thick only. It should fit in any wallet or purse, perfect to carry all the time with you. If not, you can print them in a as bright as possible filament just as I did to not take long to look for it in the “Electronics and cables” drawer.

Also if you use those really often; you can use it as key ring or strap it to your neck or camera purse. The locking mechanism is pretty satisfying and strong so don't worry about losing any of your precious data.

Use it for your action cameras, drones, DSLR's, raspberry pis, retro game consoles. All your data hungry needs are covered!

Fits up to 9 micro SD cards and 1 SD Card or Adapter Card.

It is a 2 part Organizer that should print in about 30 min in total. 

I used PETG but there's no restriction in materials. If for some reason you leave it at a car or in direct sunlight, I would use at least ABS. 

Print in 0.2 mm layer height, if you don't trust your 1st layer, use 0.1 mm to have at least 2 layers for the thinnest surface.

There are 2 Sheaths, one for a quick view of what you have, and other closed entirely; though is so thin is almost see through no matter the filament color or material.

Let me know if you found it useful.