What to eat - Wheel of fortune

Here's a wheel to inspire you when you have a clue what to cook or order for lunch or dinner.

Print in PLA, no support needed.

It requires

• 3 different filament colors (PLA)
• 17 magnets (10mmX2,7mm) https://www.amazon.fr/gp/product/B075FL7FVS/ 
• A bit of super glue
• 1 608ZZ ball bearing : https://www.amazon.fr/gp/product/B07S3SZZST/

Instructions

1. Insert all the magnets in the holes behind the wheel, and one on the wheel base (on the bottom), make sure it's on the right side. You don't have to glue them.
2. Insert the ball bearing in the middle of the wheel.
3. Insert the center wheel part between the base and the ball bearing, make sure to align the side on the wheel with the pick base
4. Glue the pick base with the pick, and then glue the pick base to the “center wheel”
5. TA-DAA !

PS : if you like this project, you can support me here : https://ko-fi.com/hellgy