The HomeCube - MMU integration

Note: This file set is an extension to the HomeCube enclosure project. To make use of this file set, you have to download the basic file set and building instructions PDF as well.

These are the printed parts needed to use an MMU or SMuFF inside the HomeCube. The purpose of this extension set is to guide up to five (Teflon) tubes into the housing at the height that's most purposeful for the MMU (avoiding unnecessary tube bending), yet avoiding to run the tubes through the enclosure's wall, so one can still take off the cabinet from the base plate without the need to unmount any of the filaments mounted in the MMU.

You do not need an MMU to print the parts, nor does the MMU integration affect the enclosure's function if there's no MMU installed. So, if you're not sure yet whether to buy an MMU or not, you may prepare the MMU integration without having to fear any restraints in the case that you decide not to add an MMU.