September 1, 2024
Description
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16m
The Model is 200x200mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 2.1mm
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Red Transmission Distance: 4
PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 3 unique filaments Swap Instructions:
Start with Black At layer #6 (0.56mm) swap to Red
At layer #16 (1.36mm) swap to Jade White for the rest.
License:
Creative Commons — Attribution — Noncommercial
Chris Dobson
