"Beware of the Dog!" Sign (Extreme Edition)

Thank you for supporting me!

This is another free 3D model made available for you. I love sharing my models, but designing, testing, polishing, uploading and maintaining them is a lot of work. In case you enjoy this model, please leave a small Donation or Buy me a Coffee. Thank you!

Design

The best way to print this sign is using a multi color printer like the i3 MK2 with MMU2. However, you can follow instructions like the one attached below to handle the filament changes manually.

Red and black colors are extruded into the white part by 0.4mm. So it is recommended to use a 0.2mm layer height to print this sign. 

PLA is fine, PETG lasts longer when used outside.

The model is roughly 125mm wide. In case you scale it, take care 0.4mm * scale factor is a multiple of your layer height. Scale factors like 1.5, 2.0, 2.5 etc are fine when using 0.2mm layer height.

Like for all multi color texts, print the sign with the front side down - this will give you a perfect surface.