Ground Anchor Screws (For Ecovacs Goat G1 Station)

I created these screws as a replacement for the original ground anchors of the Ecovacs Goat G1 robot lawnmower.

I printed the model you can see in the pictures on a Prusa MK3S+ in ASA without any issues. 

No need for support.

Make sure that your filament is dry since this will have a significant impact on the strength of the screws.

Moreover, I would recommend to use a brim when in doubt about the bed adhesion.

I also included the Fusion and STEP files in case you want to remix the design or adapt the measurements.

If you have questions, remarks, suggestions, I would be happy to hear from you.