September 3, 2024
Description
A mount for Ziisor's TX900-BLG-55 antenna on a 2020 extrusion.
Use a slotted nut and M3 screw to secure. An M3 washer can be used between the screw and part to prevent cracking.
Designed to be printed with 0.2mm layers, 3 outer perimeters and 6 top + 6 bottom layers.
Notes:
Print with 3 outer perimeters and 6 top + 6 bottom layers.
Category: Electronics
License:
Creative Commons — Attribution — Share Alike
8
Andrew Yong
