September 5, 2024
Description
Wanted an angled stand for my KRK S10 subwoofer, and most were a bit too small, so I made my own.
The lager model in the pictures were printed on an Ultimaker S5 with a maxed out build volume. The square one is meant to comfortably fit on Bambu X1/P1 printers.
I also had a little bit of leftover rubber, so I taped it to the top to help reduce vibrations. Dont know if it makes a difference, but I did it anyways. \_(ツ)_/
License:
Creative Commons — Attribution — Noncommercial
Jace
