September 4, 2024
Description
Description
This is another free 3D model made available for you. I love sharing my models, but designing, testing, polishing, uploading and maintaining them is a lot of work. In case you enjoy this model, please leave a small Donation or Buy me a Coffee. Thank you!
In case the nose to mount the floor nozzle / hose to your Kärcher vacuum, this is a replacement part. After removing the old nose, it simply slips over the pipe shaped end of the nozzle.
It can be mounted using two short M4 screws or by simply glueing it. Take care, the nosehas a different top and bottom shape to slide into the mounting hole of the vacuum.
Designed to be printed using a 0.4mm nozzle and 0.20mm layers, PETG. No support required. Additional perimeters are a good idea - especially for the nose area.
License:
Creative Commons — Attribution — Noncommercial
8
Harry
