Power Tool & Battery Slatwall Mount Holder for Ryobi USB

A collection of holders  that I use to mount my Ryobi USB tools on Slatwall.  This makes your tools easily accessible and allows you to show off your collection as well.

For the battery holder the regular version has an opening for plugging in the charging cable so you can both store and charge your batteries with it.  If you just want storage and would rather the port be protected there “closed” version achieves that.

I spent a lot of time trying to tweak the dimensions so that the parts would latch onto the Slatwall but not marr PVC Slatwall, but this is about the best I could come up with.  I found it that different areas of wall could be looser/tighter and also different filaments played a role as well.  In many cases you will need to file down the little latching nub a bit.  Don't force it onto your wall if you feel too much resistance.  You can and will damage PVC Slatwall this way. 

I have only tested with storeWall as that is the only system I personally have, but in theory this should work for most 3" Slatwall if the dimensions are close enough.  I would appreciate any feedback if someone can test these on other Slatwall.

Tools I've tested with so far on storeWall Slatwall:

FVC51K Power Cutter

Get 25% off CA Filament by using the following link:  http://referrals.californiafilament.com/v4Ge58zv?smile_ref=eyJzbWlsZV9zb3VyY2UiOiJzbWlsZV91aSIsInNtaWxlX21lZGl1bSI6IiIsInNtaWxlX2NhbXBhaWduIjoicmVmZXJyYWxfcHJvZ3JhbSIsInNtaWxlX2N1c3RvbWVyX2lkIjoxMjI4MjA3NDUwfQ%3D%3D