Common components for the Bumbag customizable electronics enclosure system

A collection of common utility placeable components for the Bumbag Customizable Enclosure System including cable management, mounting posts, screw-from-underneath cutouts, vents and fans.

cut_under_m3cs

Creates a countersunk cut-out for an M3 countersunk screw inserted from under the base of the enclosure. The screw will protrude by approximately L - 2.7mm (where L is the length of the screw).

cut_under_m4cs

Creates a countersunk cut-out for an M4 countersunk screw inserted from under the base of the enclosure. The screw will protrude by approximately L - 4mm (where L is the length of the screw).

Attribution

The following files are remixed from RatRig printable parts and/or published CAD models:

• ratrig_cable_guide_4.stl
• ratrig_cable_guide_cross.stl
• ratrig_cable_tray_5.stl

The files in the psu directory incorporate 3D models published by Meanwell.