Helmet of Eredin – The Witcher Wild Hunt

Eredin’s helmet – The Witcher 3 Wild Hunt 3D print files. A wearable replica of the helmet belonging to Eredin Bréacc Glas, King of the Wild Hunt.

Files contain pieces of the helmet ready to be 3D printed and complete helmet files, that are not cut into smaller pieces.

SCALE
At 100% scale the helmets inner dimension are approximately:
– Width  223 mm
– Length 260 mm
– Height  293 mm

outer dimensions are:
– Width 272 mm
– Length 314 mm
– Height 390 mm

You can scale the model as you wish but we can’t guarantee that at a much smaller size, the model will print well. We create our 3D models on our average-sized body template. Read about the sizing and how to scale the models to fit your body here.

PRINTER SETTINGS

We use these settings for most of our prints:
– Layer height 0.15 mm
– Infill 15%
– Supports 45°
For parts that are tall but have a small base, we use a 10 mm brim for better bed adhesion.

Printing settings will vary greatly depending on your specific printer.

We try to make the models in a way that uses as little support material as possible.
This model is meant to be post-processed after printing. This can be gluing, sanding, painting, etc. We use hex-pegs (included in the files) that will help you connect the cut pieces of the model.

Do you like the model and don’t have a 3D printer? There are lots of people who offer 3D printing services these days. Try searching for someone who offers them in your area.

This fan-made model was brought to life by 3Demon. We are a group of modeling and 3d printing enthusiasts based in Prague, Czech Republic. We’ve been making 3D printable models for more than a decade. We make a lot of cosplay accessories but we also make all sorts of interesting 3D models. You can join our community or just look at more of our creations here. 

Leshen Controller Holder Statue