This fixing peg is designed to ensure maximum stability and durability in any camping or outdoor activity scenario.
Key features:
The fixing peg features a spiral shape, designed for easy and secure insertion into the ground, whether on soft or harder terrain. This system ensures a firm hold, even in strong wind conditions or uneven terrain.
Suitable for a variety of applications, from attaching camping tents, awnings or temporary shelters, this stake is an essential accessory for any adventurer.
Its lightweight design makes it easy to carry, taking up little space in your equipment, only 14 cm long and 7 wide.
Printing:
If you want to use your preferred slicer settings, keep the following topics in mind:
Orientation:
If the model is not in the ideal position for printing, it is convenient to adjust the position of the model on your slicer, keeping the flat face of the cutting piece at the base. As represented in the video alongside, in case you are using PrusaSlicer.
Bed Adhesion:
It is advisable to reinforce the adhesion of the object to the HotBed. To do this, simply add the "brim" or "raft" option to the slicer settings.
Supports and Layer Thickness:
Based on some tests I carried out, it will not be necessary to use any type of support for this model.
I recommend using a layer thickness of 0.16 mm or less to achieve a good result. Layer heights greater than 0.16 mm have not yet been tested.
Please note, the settings mentioned above are just suggestions based on the tests I carried out and may change over time. Only you decide what to do with them
3D Layers Brothers
