Shoe Insole - Simple

Just a simple insole that you can shrink or grow to work in just about any shoe. 

This TPU printed insole is for my Shimano XC3 Mountain Bike shoes for a little extra cushion. Insole is 5mm thick and made for size 45s (10.5).  If you need a bigger or smaller size, just adjust in your slicer

I actually printed it at 4mm height instead of 5mm. Just set that in your slicer.  I used 20% infill, 2 walls, 2 top layers, 2 bottom layers, and it feels good to me.  You can play with different infill patterns to provide different levels of support as well. I used cubic for these. 

If it works for you, please leave a like.