cute bottle shark opener ("...bottle shark tu-tu-tu-tu... :)))")

I recommend to print it from PETG plastic, but you are free to chose other plastics as well.
The shark has 2 slots for cylindrical magnerts (10 mm diameter, 5 mm height) on the opener side, so the opener can be easily placed on the fridge door or smth. 

To fix the magnets in the slots, please use superglue, hot glue or similar (I prefer super glue).

The magnets will alow you to always keep this opener on the fridge door and press some paper memos on it, if u need that sometimes (which someone might found quite useful). It's also quite handful to use magnets on the bottom of the opener to catch the bottle caps :))

If You  don't want to place magnets, though, you can just skip the step with magnets and keep the opener body with open slots for magnets, OR you can print those small cylinders from other colour of plastic and glue them instead. (for that please find "insertion_10x5mm.stl" file).

The metal part of the openner (4x1.8 mm or 4x2.8mm) can be found on Aliepress, Taobao or Amazon:

You'll also need two M3x5 or M3x6 mm screws and two threaded heat inserts for plastic, as shown on the picture:

Enjoy your drinks and please don't forget to rate this model if you like it :)