Ikea Alex sorting set

This is a set of stack able sorting boxes. It fits in 3 by 3 into the Ikea Alex draws. But it can be used stand alone too.

There are many different types and heights from 30mm to 70mm. Also a dual compartment for a calculator or smartphone and the tripplec for a creditcard compartment.

Also added some lids and more options. 

Most types are described in the “types.pdf” file in the otherfiles section. 

Note: if you print a lot of these (like I did) you may want to change the angle on the print sheet a little bit each time. I had some wear on the print sheet in the corners of the boxes at some point. 

Update: there is a configurable Fusion 360 version here: https://www.printables.com/model/694395-configurable-ikea-alex-sorting-set-fusion-360-file

Update: added some half ones with holders for AA or AAA batteries. 

Update: added the open versions to also store longer things.

Update: increased the diameter of the AA holder, it was a bit tight with some battery brands.

Update: changed size of the AA holder to 60 and made the AA and AAA battery slots a tiny bit wider for better fit

Update: added the quads with two big, one medium and one small comparment

Update: added the SD and µSD version. WARNING: I have not testprinted the SD and µSD versions yet. 

Update: added the tripplen because I needed it for something specific.