September 6, 2024
Description
The extruder lever occasionally leans to the right during prints. This has caused the filament guide to wear and sometimes causes the filament to stop feeding. I modelled this simple wedge that prevents the lever from leaning over. I can continue to print until I can determine the root cause.
0.4mm nozzle, 0.2mm layer, PETG, Sovol SV05
I modelled some filament guides to replace the one that was worn out:
Sovol SV01 Titan Extruder Filament Guide by southbaygsr | Download free STL model | Printables.com
License:
Creative Commons — Attribution — Noncommercial — Share Alike
7
southbaygsr
