September 7, 2024
Description
Project: Igel.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 200x177.25mm in size
Filaments Used:
PLA PolyTerra Charcoal Black Transmission Distance: 0.1
PLA PolyTerra Fossil Grey Transmission Distance: 0.1
PLA PolyTerra Marble Limestone Transmission Distance: 0.3
PLA PolyTerra Cotton White Transmission Distance: 3.8
This print uses 4 unique filaments
Swap Instructions:
Start with Charcoal Black
At layer #11 (0.96mm) swap to Fossil Grey
At layer #19 (1.6mm) swap to Marble Limestone
At layer #29 (2.4mm) swap to Cotton White for the rest.
License:
Creative Commons — Attribution — Noncommercial — Share Alike
Dieti
