v2.0 pocket knife fully printable / Taschenmesser (for lefties)

It s a pocket knife, which I draw just for fun. It s definitely no real weapon!
This version is constructed for left-handed persons.

The version for right-handed persons is also available.
--> http://www.thingiverse.com/thing:103155

I used a M3x15 cylinder head screw, M3 hex nut and a big M3 washer to joint the bar and the blade.
If you have the possibility you should cut the M3x15 clylinder head screw 2,9mm.

Update:
There is now version 2 available. Version 2 is completely 3d printable and designed by kohlerw and me. That means you don t need any screws or nuts to manufacture it.
Only print the peg and put it in the hole through the blade. If necessary you can use a (small) drop of glue to fix the peg in the holder.

Although, I printed everything in PLA, I think it s better to use ABS or maybe nylon for the holder and the peg.

The knife is still in progress. Let me know your thoughts.