Enclosure for miniSpartan3 FPGA Dev Board

This is an enclosure for the Scarab Hardware miniSpartan3 FPGA dev board ( http://www.scarabhardware.com/minispartan3/ ). The miniSpartan3 is a really low-cost Xilinx Spartan 3 FPGA board with an HDMI port, USB, etc. This is a remix of the enclosure I made for their more full-featured miniSpartan6+.

The enclosure can be used simply as a base for the board to snap into, leaving the top open... or you can print the top, which snaps onto the base, enclosing the board. There are two tops - one with the Scarab Hardware logo, the other with no logo. There are screw holes in the bottom, in case you want to attach the board to the base.

There are openings for the HDMI port and Mini USB port... as well as holes to access the DIP switches, reset switch, and windows for the LEDs.

The I/O expansion connectors are unobstructed inside the case, though I don't personally use them for anything right now, so I didn't create any openings for them. Openings for the I/O connectors can easily be added to the lid and/or the base.