Summary

I developed the tall/twisted 'chimney' vase to test out the overall print volume of my C-Bot Printer: In the image, it's the tall twisted vase on the right. The Diamond vase (on the left) was created next, and they both currently sit on either side of my chimney.

As printed, the Chimney Vase it's 280mm wide, and 508mm tall. The Diamond Vase is 220mm wide and 370 mm tall. But obviously you can scale either of them to whatever size you'd like.

On a side node, if you flip the Chimney Vase over, it works well as a drum :)

Print Settings

Rafts:

No

                                            <p class="detail-setting supports"><strong>Supports: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting resolution"><strong>Resolution: </strong>                     <div><p>500 micron</p></div></p>                                                                                <p class="detail-setting infill"><strong>Infill: </strong>                     <div><p>None</p></div></p>                                                        <br>                        <p class="detail-setting notes"><strong>Notes: </strong>                    </p><div><p>I sliced this them both in Simplify3D's 'vase mode', using my 1mm E3D-v6 Volcano nozzle.  Because of that, I sliced with 500 micron layer heights, one shell.  Printed in Gray PLA, the Chimney Vase took 4.5 hours at that size, and the Diamond Vase was 3 hours:  A floor was created on both, but no roof.</p></div>

Chimney & Diamond Vases

Chimney & Diamond Vases

Related Models