Summary

This is a remix of WC_Wookiee's Wizard Staff topper. I split it for easier printing, resized it, and
made it manifold. I also added a ball to the top to make it look a little cooler and more
importantly, so that my son wouldn't have a very sharp point at the end of his Wizard's Satff
which is part of his halloween costume. If you make one of these, you really must include the
ball at the top!

I sized it to fit a standard 1 1/8" diameter broom handle from the hardware store. You can
resize to fit your needs.

Print Settings

Rafts:

No

                                            <p class="detail-setting supports"><strong>Supports: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting resolution"><strong>Resolution: </strong>                     <div><p>.2mm</p></div></p>                                                                                <p class="detail-setting infill"><strong>Infill: </strong>                     <div><p>10%</p></div></p>                                                        <br>                        <p class="detail-setting notes"><strong>Notes: </strong>                    </p><div><p>I printed all three peices at the same time in the orientation provided.  This orientation won't need support and printing them together lets the filament on the thin peices cool down enough between layers that it won't warp or get heat soaked.</p><p>I printed mine in PLA with the heat bed set to 40 degrees</p></div>

Post-Printing

Glue the three pieces together with super glue as shown in the assembled pictures and then
glue it on the end of a broom stick.

Wizard Staff

Wizard Staff

Related Models